升降平臺廠家http://www.shengjiangji168.com/介紹在液壓升降貨梯的安裝過程中,，一定會有鋼絲繩的安裝,，下面濟南航天升降機械的專家給大家詳細(xì)分析一下如何安裝鋼絲繩,？

1、升降平臺廠家介紹將導(dǎo)軌安裝到要求的高度,，之后將液壓升降貨梯天輪安裝好,，并且用鋼絲繩懸掛好對重。將天輪,、繩輪,、鋼絲繩及繩具吊到吊籠頂部并備好螺栓等，然后用M8X30螺栓將鋼絲繩架固定在吊籠上,。
Lifting platform manufacturers introduced the rail is mounted to a required height, the installation of hydraulic lifting elevator sheave, and wire rope for hanging the weight. The head sheave and rope pulley and rope and the rope

hanging to the cage at the top and preparation of bolts, and then the bolt with M8X30 will wire rope frame is fixed on the suspension coop.

2,、升降平臺廠家http://www.shengjiangji168.com/談到將吊籠升到導(dǎo)軌架的頂端，大約在500mm處的位置,，然后用吊桿將天輪安裝到導(dǎo)軌架的頂部,，最后用M24螺栓固定。安裝繩輪,，將鋼絲繩穿過繩輪和天輪放至地面的配重上,，并用三個繩卡固定在配重上，將鋼絲繩的另一端用三個繩卡固定在繩輪上,。
Lifting platform manufacturers about the suspension coop rose to the top of the guide rail frame, about in a 500mm position, and then boom will head sheave mounted to the top of the guide rail frame, the M24 bolts. Install the sheave and the rope through the pulley and pulley counterweight to the ground on, and with three rope card is fixed on the counterweight, and the other end of the wire rope with three rope card is fixed on the rope pulley.