隨著導軌式升降平臺http://www.shengjiangji168.com/的使用率大幅增加,，人們對安全性能和舒適性能的要求也越來越高，導軌式升降平臺中的護欄是高空作業時重要的保護措施,，下面濟南航天升降機械的專家給大家詳細分析一下導軌式升降平臺對護欄的要求有哪些,？

1、導軌式升降平臺護欄可采用實體鋼板,、沖孔鋼板,、焊接或編織網等制作，嚴禁偷工減料,，在基礎上平臺和對升降通道周圍應設置護欄,，輕便型可采用其他措施進行圍護。
Guide rail type lifting platform guardrail can use solid steel plate, steel punching, welding or woven net production, it is strictly prohibited to cut corners, the platform on the basis of and around the lifting channel should be parapet, portable and other measures can be adopted to the envelope.

2,、導軌式升降平臺護欄應能承受水平方向垂直圍欄施加的350N作用力而不產生永久變形,，該物體為扁平等邊正方體，邊長50mm,邊緣倒圓半徑為3mm,。
Guide rail type lifting platform guardrail should can bear external force applied to the horizontal direction perpendicular to the fence and without permanent deformation, the object is a flat equilateral cube, 50mm in length and edge rounding radius is 3mm.

3,、當導軌式升降平臺附件或操作箱位于施工電梯護欄內部時，應另設置專用區域與其隔離,，并安裝鎖緊門,，圍欄門應裝有機電聯鎖裝置，使平臺只有位于底部規定位置時圍欄門才能開啟,，且在門開啟后平臺不能啟動,。
When the guide rail type lifting platform attachment or operation box is located in the interior of the construction elevator rails should be another set of special area and isolation, and install the lock the door, fence door should equipped with mechanical interlock device, the platform only in defined positions of the bottom of the fence door can be opened and in door open platform can not be started.

4、導軌式升降平臺http://www.shengjiangji168.com/護欄的正常高度不應低于900mm,，護欄正常間隙在60mm左右,，不能間隔太大，除非客戶有規定,。
Rail type lifting platform for the normal height of the fence should not be less than 900mm, the normal clearance of the fence in the 60mm or so, can not be too large, unless the customer has a specified.